NETGEAR Cable/DSL ProSafe Firewall FR328S User Manual
Page 55
FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
Protecting Your Network
5-9
M-10207-01, Reference Manual v2
The parameters are:
•
Service
From this list, select the application or service to be allowed or blocked. The list already
displays many common services, but you are not limited to these choices. Use the Add
Services menu to add any additional services or applications that do not already appear.
•
Action
Choose how you would like this type of traffic to be handled. You can block or allow
always, or you can choose to block or allow according to the schedule you have defined in
the Schedule menu.
•
Send to LAN Server
Enter the IP address of the PC or Server on your LAN which will receive the
inbound traffic covered by this rule.
•
WAN Users
These settings determine which packets are covered by the rule, based on their
source (WAN) IP address. Select the desired option:
•
Any All IP addresses are covered by this rule.
•
Address range If this option is selected, you must enter the "Start" and "Finish" fields.
•
Single address Enter the required address in the "Start" fields.
•
Log
You can select whether the traffic will be logged. The choices are:
•
Never - no log entries will be made for this service.
•
Always - any traffic for this service type will be logged.
•
Match - traffic of this type which matches the parameters and action will be logged.
•
Not match - traffic of this type which does not match the parameters and action will be
logged.