National Instruments GPIB-PC - Manual (Page 76)

©National Instruments Corp. 4A-1 GPIB-PC User Manual
Section Four A -
BASICA/QuickBASIC GPIB-PC
Function Calls
This section contains information for programming the GPIB-PC in
BASICA and QuickBASIC, Versions 4.0 and earlier. The term
BASICA, as used in this section, refers to Advanced IBM Interpretive
BASIC for the IBM Personal Computer. The term QuickBASIC refers
to Microsoft QuickBASIC.
The programming information in this supplement can be used with all
versions of BASICA and QuickBASIC unless specified otherwise.
When different programming information is required that is specific to a
particular version, this information is separated and identified by a
frame with the respective version number in the upper left corner. An
example of this appears as follows:
If information is required that is specific to two versions, this
information is separated and identified by a frame with the two version
numbers in the upper left corner. An example of this appears as follows: