Hard drive recovery, Recovery from a cd-rom, Hard drive recovery -14 – National Instruments PXI NI 8171 Series User Manual
Page 30: Recovery from a cd-rom -14
Advertising
Chapter 2
Installation and Configuration
2-14
ni.com
Figure 2-3. Installing a SO-DIMM in an NI 8171 Series Controller
Hard Drive Recovery
The NI 8171 series controllers include a recovery CD. There are two
methods for recovering the hard disk to its original state.
Recovery from a CD-ROM
These steps apply to a USB CD-ROM, IDE CD-ROM (when using a
PXI-1020 or PXI-1025 chassis), or SCSI CD-ROM drive (when a SCSI
adapter is installed).
To recover the hard disk from a CD-ROM:
1.
Load the recovery CD into the CD-ROM drive.
2.
Press <Esc> during the BIOS POST. After POST, a boot menu is
displayed. Select the CD-ROM drive.
1
SO-DIMM Module
2
SO-DIMM Socket
1
2
Advertising