National Instruments PXI NI 8171 Series - Manual (Page 36)

Chapter 3 I/O Information
NI 8171 Series User Manual 3-4 ni.com
Ethernet
Figure 3-3 shows the location and pinouts for the Ethernet connector on the
NI 8171 series. Table 3-4 lists and describes the Ethernet connector signals.
AMP manufactures a mating connector, part number 554739-1.
Figure 3-3. Ethernet Connector Location and Pinout
4 DTR* Data Terminal Ready
5 GND Ground
6 DSR* Data Set Ready
7 RTS* Ready to Send
8 CTS* Clear to Send
9 RI* Ring Indicator
Table 3-3. COM1 and COM2 Connector Signals (Continued)
Pin Signal Name Signal Description
Ethernet
1
8