National Instruments PXI NI 8171 Series - Manual (Page 42)

Chapter 3 I/O Information
NI 8171 Series User Manual 3-10 ni.com
GPIB (IEEE 488.2)
Figure 3-8 shows the location and pinouts for the GPIB connector on the
NI 8171 series. Table 3-9 lists and describes the GPIB connector signals.
AMP manufactures a GPIB mating connector, part number 554349-01.
Figure 3-8. GPIB Connector Location and Pinout
Table 3-9. GPIB Connector Signals
Pin Signal Name Signal Description
1 DIO1* Data Bit 1
2 DIO2* Data Bit 2
3 DIO3* Data Bit 3
4 DIO4* Data Bit 4
5 EOI* End or Identify
6 DAV* Data Valid
7 NRFD* Not Ready for Data
8 NDAC* Not Data Accepted
9 IFC* Interface Clear
10 SRQ* Service Request
11 ATN* Attention
GPIB
1
12
13
24