5 three button printer, 5-1 changing the paper, 5-2 test print – NetComm HS800 User Manual
Page 10
Advertising
www.netcomm.com.au
Rev. 1 - YML698
Page 10
HS800 User’s Guide
1-5 Three Button Printer
Figure 1-5 Three Button Thermal Printer
1-5-1 Changing the paper
If there is no paper, the Button A indicator will be flashing. To change the paper:
Step 1:
Open the clear cover by pressing down the lever on the right hand side of the
printer.
Step 2:
Remove the old roll.
Step 3:
Insert the new roll so that the paper edge is facing away from the front of the
printer.
Step 4:
Close the clear cover.
Step 5:
Press and release Button A to feed the paper through.
1-5-2 Test Print
To print a test page on the Printer:
Step 1:
Turn the power off.
Step 2:
Hold down Button A and turn the power on.
Step 3:
Release Button A and the printer will print a test page.
Button A
Button B
Button C
Advertising