NetComm HS800 - Manual (Page 7)

Rev. 1 - YML698 www.netcomm.com.au
HS800 User’s Guide Page 7
1-4-1 Front Panel
The front panel of the HS800 Wireless Gateway is shown below.
Figure 1-2 HS800 Wireless Gateway Front Panel
Description of LEDs
LED State Description
Power Off The HS800 Wireless Gateway is not receiving
electrical power.
Green The HS800 Wireless Gateway is receiving
electrical power.
WAN Green The WAN port is connected to your xDSL or
Cable modem.
Green (Blinking) Data is travelling through the WAN port.
LAN (1-4) Green A port has established a valid 10/100Mbps
network connection.
Green (Blinking) 10/100Mbps traffic is traversing the port.
Off Port has not established any network
connection.
Wireless Green The HS800 Wireless Gateway has
established a valid wireless connection.
Green (Blinking) The Wireless connection is active.
Status Off The HS800 Wireless Gateway status is
defective.
Green The HS800 Wireless Gateway status is
complete.
Green (Blinking) During firmware upgrades, the status LED will
blink.