Advertisement – NetComm HS800 User Manual
Page 47
Rev. 1 - YML698
www.netcomm.com.au
HS800 User’s Guide
Page 47
Item
Default
Description
IP Address
Empty
Enter the IP address you would like to pass
through.
Subnet Mask
Empty
Enter the subnet mask you would like to pass
through.
MAC Address
Empty
Enter the MAC address you would like to pass
through.
Mask
Empty
Enter the subnet mask of you would like to
pass through.
Pass Through List
Display the pass through Information of
HS800 Wireless Gateway.
No.
-
The index number of the pass through
address.
Active
Disable
Click on check box, active or inactive the pass
through address.
Address List
-
Display the pass through address(s).
Type
-
Display the type of pass through address.
Delete
Disable
Select the check boxes and click ‘Delete’ to
delete the pass through address(s).
Click the Add to List button to add a new entry.
Click the Apply button to save the new settings.
Click the Delete All & Apply button to delete all entries.
Note: The priority of “pass through” is higher than “Filtering”.