Logging in to the hs800, Customising the hs800 – NetComm HS800 User Manual
Page 11
Advertising
Rev. 1 - YML698
www.netcomm.com.au
HS800 User’s Guide
Page 11
2.
Logging in to the HS800
Step 1: Start your Browser
Start your browser, and then enter the factory default IP address 10.0.0.1 in your
browser’s location box. Press Enter.
Figure 2-1 Web Browser Location Field (Factory Default)
Step 2: The HS800 Wireless Gateway Configuration Tools Menu
The HS800 Wireless Gateway configuration tools menu will appear. In the
Username and Password field, type the factory default user name (admin) and
password (admin)and click “Getting Started”. Select the “Advanced Setup”
tab to access the customisation screens.
Figure 2-2 Configuration Tools Menu
Advertising