2 to connect using a user configured profile – NetComm NTC-990 User Manual

Page 25

Advertising
background image

6.1.2

To connect using a user configured profile

If none of the pre-configured profiles are suitable you may configure a 4

th

user defined profile as follows:

Select Profile Number 4

Make sure that the APN name field is correct. This is very important. The example above shows the
APN name to be “apnname4” as an example but yours will be specific to your carrier.

As for the APN, the “User” and “Password” fields will need to be set appropriately for your specific
carrier.

You may leave the other profile settings as their default values shown above.

Once you have entered the appropriate detail in this section of the form click “Modify Entry” to save
this connection profile.

Revision 1.55

NetComm Limited

March 2009

24

Advertising
This manual is related to the following products: