13 rj-45 ethernet port integration parameters, Rj-45 ethernet port integration parameters – NetComm NTC-990 User Manual
Page 66
13
RJ-45 Ethernet Port Integration Parameters
You can use the guide below to design Ethernet cables to integrate the Cellular Router into your systems.
Standard RJ-45 Ethernet Pinout:
Pin Function
Color
----------------------------------------------
1
TX +
White/Orange
2
TX -
Orange/White
3
RX +
White/Green
4
Blue/White
5
White/Blue
6
RX -
Green/White
7
White/Brown
8
Brown/White
Below you will find pin outs of the RJ-45 Ethernet Plug and Jack connectors:
NOTE:
The Ethernet port on the Cellular Router is a DTE non-auto switch so you will need a crossover cable if
connected directly to your PC.
However, if the there is a Hub/Switch connected between the Cellular Router and PC you will need to use a
straight through cable.
Revision 1.55
NetComm Limited
March 2009
65