NetComm NTC-990 - Manual (Page 29)

7 Ethernet Related Commands
7.1 How to configure the Ethernet IP address
This facility is available on the LAN page.
The default IP of the Ethernet port is 192.168.1.50 with subnet mask 255.255.255.0.
If you wish to change this then simply enter the new IP address and click on the ‘Save’ button at the bottom
of the page.
Since the IP address has changed you will have to re-enter the new IP address configured in your browser
to access the configuration pages.
7.2 How to configure DNS Masquerading
This facility is available on the LAN page.
DNS masquerading allows the cellular router to forward DNS requests to dynamically assigned DNS
servers, clients on the cellular routers LAN can then use the cellular router as a DNS server without
needing to know of the dynamically assigned DNS servers assigned by the cellular network.
There should be no need to disable this feature in most cases however if you do need to do so simply
select the “Disable” and click save.
Revision 1.55 NetComm Limited
March 2009
28