NetComm NTC-990 - Manual (Page 33)

7.4 How to configure your Device’s IP address manually (no DHCP)
If your device has a statically set IP address you can have your device to work with the Cellular Router by
manually configuring your device to the following settings:
Set your devices IP address to any valid IP between 192.168.1.2 and 192.168.1.119 or disable the DHCP
server and use any address. Do not use the IP address assigned to the modem’s Ethernet Connector.
Subnet to: 255.255.255.0.
Set your Gateway to the IP address of the Modem’s Ethernet Connector: 192.168.1.50
DNS (if required) set to 192.168.1.50 or manually set to your carriers DNS Servers.
Revision 1.55 NetComm Limited
March 2009
32