NetComm NTC-990 - Manual (Page 62)

11.2.5 I cannot seem to get a wireless WAN connection
• Click on the Data Connection link on the HTML page and check that the APN is correct.
• Also check that the username and password credentials are correct if the APN in use requires
these.
• Make sure that Auto Connect is enabled on the PPP Profile Connect section on the Data
Connection page.
11.2.6 I have set the Band but now it does not show the correct Frequency on the
Home page and I cannot get a connection
If this happens you must reboot the Cellular Router. The Reset button on the home page will reboot the
Cellular Router.
11.2.7 The SIM status indicates that the SIM is “not installed or reboot required” on the
Home page
If a SIM is installed correctly this may indicate that the SIM has been removed or inserted whilst the unit is
powered up. In this case you must reboot the unit. The Reset button on the home page will reboot the
Cellular Router.
Revision 1.55 NetComm Limited
March 2009
61