Nikon WT-3 - Manual (Page 11)

3
System Requirements
Before using the WT-3 or WT-3 Setup Utility CD, confi rm that your system meets the
following requirements:
Camera
• Model: Nikon D200 digital single-lens refl ex camera
• Firmware: A and B version 2.00 (provided on supplied WT-3 Setup Utility CD)
Power source
One EN-EL3e rechargeable Li-ion battery (supplied with D200) or EH-6 AC
adapter (available separately)
OS 1
• To connect to a computer: Windows XP Service Pack 1 or later (Service Pack 2 rec-
ommended) or Mac OS X version 10.3 or later required (Power PC G4/G5 CPUs
only). Connection to computers on other networks via router not supported.
• To upload pictures to an ftp server: Operation has been confi rmed with Windows XP
Professional and Mac OS X version 10.3 or later. Under these operating sys-
tems, ftp servers can be confi gured using standard ftp services such as IIS (In-
ternet Information Services). Internet ftp connections and ftp servers running
third-party software are not supported.
Network
• Wireless: Wireless LAN access point or computer with built-in or external wire-
less LAN adapter (IEEE 802.11b or 802.11g compliant). 2
• Ethernet: Ethernet cable and computer with built-in or external Ethernet port
(100 base-TX or 10 base-T)
Miscellaneous
• WT-3 Setup Utility: required to copy computer profi les to camera (camera can be
confi gured for use with ftp servers using either WT-3 Setup Utility or camera
menus). WT-3 Setup Utility can not be used to confi gure camera for use with
optional PD-10 wireless printer adapter.
• CD-ROM drive: required when installing WT-3 Setup Utility
• USB: UC-E4 USB cable (included with camera) and computer with built-in USB
port required when copying network profi les to camera. 3
1. For the latest information on supported operating systems, see the Nikon website for your
area ( 1).
2. For information on wireless network settings for Windows XP Professional and Mac OS X,
see the online help for the WT-3 Setup Utility.
3. Connect the camera directly to the computer. The camera may not function as expected
when connected via a hub, extension cable, or keyboard.
The PD-10 Wireless Printer Adapter
A PictBridge-compatible printer with a fl at (type A) USB connector is required for connection
to the PD-10. A computer is not required.
Multiple Transmitters
Simultaneous use of multiple WT-3 wireless transmitters with a single host may produce un-
expected results. Do not attempt to use more than one WT-3 per host.