Nikon WT-3 - Manual (Page 27)

19
PB-6 Bellows
A PK-13 auto-extension ring and a PB-6D spacer are required when using PB-6 bellows with
the WT-3.
Disconnecting the WT-3
To disconnect the WT-3:
1
Rotate the WT-3 control lock to the L position and turn the
camera off .
2 Disconnect the USB cable.
3 Rotate the knob clockwise to unscrew the WT-3 from the camera tripod mount and remove
the WT-3 from the camera battery chamber.
4 Replace the camera battery chamber cover.
The Control Lock
Turn the camera off and rotate the WT-3 control lock to the L position when connecting or
disconnecting the WT-3 or inserting or removing the battery.