Nikon WT-3 - Manual (Page 15)

7
Installing the WT-3 Setup Utility
The WT-3 Setup Utility is used to copy computer and printer profi les to the camera.
The WT-3 Setup Utility is required when confi guring the camera for connection to
a computer in transfer, PC, and print modes. Either the WT-3 Setup Utility or the
camera menus ( 48) can be used for connection to ftp servers in transfer mode.
Follow the steps below to install the WT-3 under Windows XP or Mac OS X.
Supported Operating Systems
The WT-3 Setup Utility is compatible with Mac OS X version 10.3 or later (Power PC G4/G5
CPUs only) or a pre-installed version of Windows XP Service Pack 1 or later (Service Pack 2
recommended).
Windows XP Service Pack 1 or Later
1 Start the computer and log in to an account with administrator privileges.
2 Insert the supplied installer CD in a CD-ROM drive.
The “Select Region” dialog will be displayed; select
a region and click Next.
If the “Select Region” Dialog Is Not Displayed
If the “Select Region” dialog is not displayed, select My Computer from the Start menu
and double-click the icon for the CD-ROM drive containing the installer CD.
4 Click Easy Install.
Other Install Center Options
• Customer Support: View the ReadMe fi le or visit Nikon sup-
port websites. *
• D200 Firmware: Update the camera fi rmware ( 6).
* Internet connection required.
The WT-3 Setup Utility
The WT-3 Setup Utility supplies the computer with information about the camera and con-
trols image transfer. It must be installed on each of the host computers used by the WT-3. The
WT-3 Setup Utility is not required for upload to an ftp server in transfer mode.
3 Select a language and click Next.