Nikon WT-3 - Manual (Page 31)

23
During Upload
Do not remove the memory card or disconnect the Ethernet cable during upload.
File Names
If the destination folder on an ftp server contains fi les with the same names as images select-
ed for upload, the fi les on the server will be replaced by the images uploaded from the cam-
era. Selecting On for Custom Setting d6 (File No. Sequence) during shooting will prevent
the camera from creating fi les with duplicate fi le names. When uploading fi les from multiple
cameras to the same server, assign each camera its own folder.
Loss of Signal
Transmission may be interrupted if the signal is lost ( 25). Transmission can be resumed by
turning the camera off and then on again, activating the camera exposure meters, or select-
ing On for Wireless transmitter > Wireless LAN system once the signal is restored.
Uploading Images
1 Press the button to view pictures on the
memory card. Display the fi rst picture to be sent
in single-image playback or highlight it in the
thumbnail list.
2 Press the center of the multi selector while press-
ing the button. The image will be marked with
a white “send” icon and transmission will begin
immediately. During upload, images are marked
with a green “sending” icon. Repeat this process
to send additional images (pictures will be sent in
the order selected).
Images that have been successfully uploaded are
marked with a blue “sent” icon. Images can be re-
sent by pressing the center of the multi selector
while pressing the button to change the blue
“sent” icon to a white “send” icon.