Led indicators, Table 2. led state/device status – National Instruments NI WLS/ENET-9163 User Manual
Page 15
© National Instruments Corporation
15
NI WLS/ENET-9163 Carrier User Guide and Specifications
LED Indicators
The LED indicators for the NI WLS/ENET-9000 Series device are listed in
Table 2.
Table 2. LED State/Device Status
LED Description
Color
LED State
Device Status
10/100
Green
On
Connected at 100 Mbps
Off
No Ethernet connection or 10 Mbps
connection
LINK/ACT
Yellow
On
Ethernet link
Off
No Ethernet connection
Blinking
Ethernet activity
POWER
Green
On
Power on
Off
Power off
STATUS
Yellow
On
Device firmware booting or
resetting to factory default
Off
Normal operation
1 Blink
No C Series module detected
2 Blinks
Firmware/FPGA image corrupted,
update firmware through MAX
3 Blinks
Firmware error, reboot
ACTIVE
Green
On
A DAQ task is running on the
device
Off
Device available
WLS LINK
*
Green
On
Connected and authenticated
Off
Not connected to access point
* NI WLS-9163 Only