Net Optics Smart Filtering none User Manual
Page 36
32
*** Confidential - DO NOT Distribute ***
Director
filter add in_ports=n1.11 action=redir redir_ports=t.2
filter add in_ports=n1.1-n1.4 action=redir redir_ports=t.1
XFP Port 2
XFP Port 1
Network Port 11
Network Port 1
Network Port 4
Network Port 2
Network Port 3
+
Configurable 10 Gigabit XFP ports used as Monitor ports (with aggregation)
Figure 32:
To use one XFP port as a Span port and the other XFP port as a Monitor port:
Enter
1.
filter add in_ports=t.1 ip_proto=6 action=redir redir_ports=m.1. A filter has been defined to select all IPv4
TCP packets from 10 Gigabit Port 1 and copy them to Monitor Port 1. 10 Gigabit XFP Port 1 is configured as a Span
port.
Enter
2.
filter add in_ports=n1.11 action=redir redir_ports=t.2. A filter has been defined to copy all the traffic from 1
Gigabit Network Port 11 to 10 Gigabit Port 2. 10 Gigabit XFP Port 2 is configured as a Monitor port.
Enter
3.
filter commit. The filters are activated.
filter add in_ports=n1.11 action=redir redir_ports=t.2
filter add in_ports=t.1 ip_proto=6 action=redir redir_ports=m.1
XFP Port 2
Network Port 11
Monitor Port 1
XFP Port 1
Protocol =
TCP
Configurable 10 Gigabit XFP ports used one Span port and one Monitor port
Figure 33: