Net Optics Smart Filtering none - Manual (Page 9)

5
*** Confidential - DO NOT Distribute ***
Director
The inputs are divided into three groups: two DNMs plus the 10GbE ports. In-line DNM models support 6 in-line links,
while Span DNM models support 12 Span ports. The diagram shows one in-line and one Span DNM. Both in-line and
Span DNMs are available with either Copper or SX Fiber interfaces. Different DNM types can be mixed in the same
chassis, for example, one in-line Copper DNM and one Span Fiber DNM. The modules are hot-pluggable for easy
serviceability. One or both DNM slots can be populated. The DNM slots are numbered 1 for the slot on the left and 2
for the slot on the right. If only one slot is populated, it should be slot 1.
The two configurable 10-Gigabit XFP ports are shown in the first two columns and last two rows of the diagram. The
two dark black rows indicate that both ports are configured as Span inputs. The two dimmed columns indicate that the
ports can alternately be configured as Monitor ports. The two ports may be configured as:
Both Span •
Both Monitor •
One Span and one Monitor •
USB port
A USB port located on the back is reserved for future functionality.
Director Management
Director can be configured and managed using a command-line interface (CLI) that will be familiar to most network
administrators. The CLI runs locally over an RS-232 serial port or remotely over a secure SSH connection.
Net Optics GUI-based Compass management tools, which will be available soon, include:
Web Manager • —A Web-browser based tool to manage a single Director (at a time) from anywhere in the world
System Manager • —An SNMP platform-based tool to mange all the Director and other Net Optics iTap-enabled
devices on your network