Net Optics Smart Filtering none - Manual (Page 49)

45
*** Confidential - DO NOT Distribute ***
Director
Command Sub-Command Parameters Example and description
passwd passwd
Interactively changes the password of the SSH user
account
ping <address>* ping 10.1.1.4
Parameters:
<address> is an IP address
Pings the specified IP address to check for connectivity
port set ports=<portlist>*
autoneg=< on | off >
duplex=< full | half >
speed=< 10 | 100 | 1000 > port set n1.1-n1.3 autoneg=on duplex=full
Parameters:
<portllist> is a portlist
For other parameters, select a value from the
listed choices
For 10/100/100 Copper interface Network and Moni-
tor ports, enables or disables autonegotiation; selects
the duplex mode; and sets the fixed speed (10Mbps,
100Mbps, or 1000Mbps) if autonegotiation is off
show port show
Displays the current port status and settings
quit quit
Exits the CLI shell (same as exit and logout)
restart restart
Reboots the Director device; also called warm boot;
similar to power-cycling the device; does not change
the configuration parameters or filters
save save my_configuration-1
Parameters:
<filename> is the name of the file where the
configuration is saved; a
string; do not include an
extension
Saves the Director device configuration to a file;
saved information includes port set-up and filters
show <filename>* show my_configuration-1
Parameters:
<filename> is the name of the file to display; a
string; do not include an extension
Displays the contents of the specified saved
configuration file (see save command)
stats clear ports=all|<[portlist> stats clear ports=all
Clears RMON statistics for the designated ports
show ports=all|<[portlist> stats show ports=m.2,n1.4
Displays RMON statistics for the designated ports