Net Optics Smart Filtering none - Manual (Page 48)

44
*** Confidential - DO NOT Distribute ***
Director
Command Sub-Command Parameters Example and description
filter
(continued) list ipv6=< y | n > filter list
Parameters:
ipv6=y for IPv6 addressing; ipv6=n for IPv4 ad-
dressing (defaults to IPv4 if parameter is omitted)
Displays all pending filters (with filter IDs)
running ipv6=< y | n > filter running
Parameters:
ipv6=y for IPv6 addressing; ipv6=n for IPv4 ad-
dressing (defaults to IPv4 if parameter is omitted)
Displays all active filters
sync filter sync
Loads the pending filter list with a copy of the currently
active filters
help <command> help filter
Parameter:
<command> is any CLI command
Displays information about the specified CLI command;
if <command> is omitted, displays a list of all CLI
commands
history history
Displays a numbered list of previously executed CLI
commands; any command can be executed directly
by entering the command number preceded by an
exclaimation point; up- and down-arrow keys can be
used to scroll through the command history buffeer
(see ! command)
image < 1 | 2 > image 2
Parameter:
Valid values are 1 and 2
Chooses which system image to boot from; if <n>
is omitted, the current system image information is
displayed (see upgrade command)
list list
Shows a list of filenames of saved Director device
configurations (see save command)
load <filename>* load my_configuration-1
Parameters:
<filename> is the name of the file to load; a string;
do not include an extension
Loads a previously saved Director configuration (see
save command)
logout logout
Exits the CLI shell (same as exit and quit)
module show module show
Lists information about Director hardware modules
including system serial number, DNM types, and
XFPs