Net Optics Smart Filtering none - Manual (Page 41)

37
*** Confidential - DO NOT Distribute ***
Director
Pending filter list
Address Filter
1 n1.1 ip_proto=UDP action=drop
2 n1.1 m.1
CAM
Address Filter
1 n1.1 ip_proto=UDP action=drop
2 n1.1 m.1
After filter sync Figure 41:
Use 3. filter add, filter ins, and filter del commands to change filters as desired.
Pending filter list
Address Filter
1 n1.1 ip_proto=TCP action=drop
2 n1.1 m.1
3 n1.2 m.2
CAM
Address Filter
1 n1.1 ip_proto=UDP action=drop
2 n1.1 m.1
Filter 1 has been changed and filter 3 has been added Figure 42:
Enter 4. filter list to view the pending filter list.
Net Optics> filter list
001 ip_src=00000000/ffffffff,ip_dst=00000000/ffffffff,ip_proto=0006
l4_src_port=0000,l4_dst_port=0000,vlan=0000,action=1
in_ports=00
002 ip_src=00000000/ffffffff,ip_dst=00000000/ffffffff,ip_proto=0000
l4_src_port=0000,l4_dst_port=0000,vlan=0000,action=3
in_ports=00
redir_ports=12
003 ip_src=00000000/ffffffff,ip_dst=00000000/ffffffff,ip_proto=0000
l4_src_port=0000,l4_dst_port=0000,vlan=0000,action=3
in_ports=01
redir_ports=13
Net Optics>
Filter list command Figure 43:
Repeat steps 3 and 4 until the pending filter list is consistent with the desired filter configuration. 6.
Enter 7. filter commit. The contents of the pending filter list are copied to the CAM, activating the new filter
configuration.
Pending filter list
Address Filter
1 n1.1 ip_proto=TCP action=drop
2 n1.1 m.1
3 n1.2 m.2
CAM
Address Filter
1 n1.1 ip_proto=TCP action=drop
2 n1.1 m.1
3 n1.2 m.2
After filter commit Figure 44: