Nortel Networks Meridian M3905 - Manual (Page 98)

98
Set-to-Set Messaging
3. From the Edit Mode screen, use the
dial pad to customize the message.
Press the Delete Key to delete a
character. Press the Case Key to toggle
between upper and lower case
characters. Press the
Cancel Key to
exit the screen without saving changes.
Note 1: Please refer to “Add a Personal
Directory entry” on page 87 for detailed
instructions on using your telephone’s dial
pad to enter text.
Note 2: While in the Edit Mode screen,
Press the Up Navigation Key to access
special characters you may want to include
in the name. Use the
Navigation Keys to
locate the character you want to include.
Press the
Select Key to choose the
highlighted character. Press the Return Key
to return to name entry without selecting a
special character.
4. Press the Done Key.
Your message is saved and you return
to the
Set-Set Msg Screen.
Note: If you scroll to a different message in
the Set-Set Msg screen, and press the
Select Key, your changes are erased.
To activate or deactivate Set-to-Set
Messaging and exit the application:
/
1. Press the On Key/ Off Key to toggle
the Set-to-Set Messaging status
between On and Off.
Note 1: If messages have not been
provided by your network administrator
and a message has not been defined, the
On or Off Keys will not appear. Use the Edit
Key to enter a message before activating
Set-to-Set Messaging.
Done
On Off