Nortel Networks Passport Module 8672A - Manual (Page 119)

Chapter 6 Configuring the Passport 8672ATM Module 119
Using the Passport 8672ATM Module
Figure 51 Point-to-point bridging using 1483 PVCs
To complete this configuration, use the following procedures:
• “Creating a VLAN “byPort” and adding ports ,” next
• “Configuring two ATM 1483 PVCs on the same ATM port” on page 127
• “Associating the PVC with the VLAN” on page 124
Use Device Manager and or CLI to perform these configuration and related tasks
on the Passport 8672ATM Module.
Creating a VLAN “byPort” and adding ports
1 From the Device Manager menu bar, choose VLAN > VLANs.
The VLAN dialog box opens with the Basic tab displayed (Figure 52) .
9936EA
VLAN2 VLAN2
VLAN1
VLAN1
Passport 8600
RFC 1483 Bridged PVCs
ATM VC1
ATM VC2
ATM VC1
ATM VC2
Online MDA 2 MDA 1 8672 ATM
Passport / Centillion