Nortel Networks Passport Module 8672A - Manual (Page 58)

58 Chapter 4 Managing the Passport 8672ATM Module with Device Manager
209195-A
The MDA dialog box opens (Figure 15) .
Figure 15 MDA dialog box
Table 8 describes the fields in the MDA dialog box.
Enabling or disabling a port
You can enable or disable a port by two methods. To enable or disable a port
through the Device Manager menu bar:
1 On the device view, highlight a port.
2 From the Device Manager menu bar, choose Edit > Port.
The Port dialog box opens with the Interface tab displayed ( Figure 12 on
page 52 ).
3 In the AdminStatus area, click up to enable the port, or click down to disable
the port.
Table 8 MDA dialog box fields
Field Description
Type Media type:
• rc<XXXX>Oc3BaseSM.
• rc<XXXX>Oc3BaseMM.
• rc<XXXX>Oc12BaseSM.
• rc<XXXX>Oc12BaseMM.
Description MDA type:
• Quad OC-3c SM — quad port OC-3c single-mode fiber.
• Quad OC-3c MM — quad port OC-3c multimode fiber.
• OC-12c SM — single port OC-12c single-mode fiber.
• OC-12c MM — single port OC-12c multimode fiber.