Nortel Networks Passport Module 8672A - Manual (Page 51)

Chapter 4 Managing the Passport 8672ATM Module with Device Manager 51
Using the Passport 8672ATM Module
Additionally, many Device Manager windows and dialog boxes contain buttons.
Table 4 describes the function of these buttons.
Configuring ATM using Device Manager
Use Device Manager tabs and dialog boxes described in the following sections to
configure and manage the Passport 8672ATM Module.
To change the default settings on the Passport 8672ATM Module or to perform
any configuration tasks in Device Manager, select the port you want to configure
and open the Interface tab.
• Right-click on the port. A shortcut menu opens. Choose Edit.
• Double-click on the port.
The Port dialog box opens with the Interface tab displayed (Figure 12) .
Table 4 Device Manager buttons
Field Description
Apply Applies the changes you entered to fields in a window or dialog box.
Refresh Refreshes the information in the window. Each time you click Refresh,
new information is polled form the switch and displays.
Close Closes the window or dialog box and disregards any changes you
made to fields.
Help Does not function with the Passport 8672ATM Module.
Insert Inserts or creates a new group, such as traps.
Resize Columns Resizes column on the screen.
Note: You must always click Apply at the bottom of the tab to
implement any changes you make.
To open the Interface tab, do one of the following: