Chapter 3 installing the passport 8672atm module, Safety and environmental precautions – Nortel Networks Passport Module 8672A User Manual
Page 35
35
Using the Passport 8672ATM Module
Chapter 3
Installing the Passport 8672ATM Module
This chapter describes the procedure for installing the Passport 8672ATM
Module. It covers the following topics:
•
“Safety and environmental precautions
,” next
•
“Installing the Passport 8672ATM Module” on page 37
•
“Verifying installation” on page 40
•
•
“MDA insertion and configuration” on page 43
•
“Replacing a module” on page 44
For more information about the Passport 8600 chassis, refer to the following
documents:
•
Getting Started with Passport 8000 Series Management Software
•
Using the Passport 8600 Modules
•
Installing the Passport 8600 Modules
Safety and environmental precautions
Before you begin performing any installation or replacement procedure on the
Passport switch, please note the following safe handling guidelines:
•
To prevent damage caused by electrostatic discharge (ESD), handle the switch
chassis and modules only when you, the chassis, and the chassis modules are
properly grounded. Nortel Networks recommends the use of a grounding
wrist strap.