Nokia CC100 - Manual (Page 19)

CC100Master Bridge User’s Guide
IGMP v2 Snooping Setup
Supports IGMP V2/V1 snooping only. Shut it if IGMP V3 is adopted in the network.
Tag VLAN Setup
Enable the 802.1Q Tag VLAN function and set up the values in the field ‘VID’ and ‘Priority’. VID range is 1~4095
and Priority is 0~7.
Regard HCNA port as the network trunk. Once Tag VLAN is enabled, by default the LAN1 port and the HCNA port
are set to the same VLAN; also the LAN2 port and the HCNA port are within the same VLAN. The LAN1 port and
the LAN2 port are not within the same VLAN if assigned with different VID.
Take the following VLAN setting diagrams for example.
First example, enable Tag VLAN in both Master and EP ‘VLAN’ settings,
16