Nokia CC100 - Manual (Page 8)

CC100 Master Bridge User’s Guide
Installing the CC100 with an amplifier
TV Signal Amplifiers may cause interference when used in conjunction with this product. This interference may
occur with particular types of TV Signal Amplifiers when they are connected to the coaxial cable and are placed in
between the Master (CC100) and any of the Slaves (CC101). In order to avoid potential interference, please make
sure that the Master is installed “downstream” of the TV Signal Amplifier such that the Amplifier is not on the cable
that runs in between the master and the slave units.
The below figure shows the recommended setup to install CC100 with an amplifier:
5