Nike Triax Elite HRM/SDM - Manual (Page 18)

18
Using the Chronograph
CHRONOGRAPH mode will record heart-rate, distance,
pace, lap and total-time data during a run if the components
are in the correct operating position. See page 5, Setup.
Both lap times and total-time are captured simultaneously
when you press the lap button. Follow steps through
to use the chronograph.
2
Press VIEW button at any
time during run to switch
information in main display.
Scroll to
CHRON mode.
Lap View
Total-Time View
Heart-Rate View
Distance View
Pace View
Mark Laps
Lap time is the time required
to go once around a track or
complete a segment of a run. LAP 1
and
Mark Total-Time
Total time is the time from
the beginning of run up to
the point of mark. TOTAL 1
Start
Run Mark Lap/Total
You will have 7
seconds to read
lap and total
time before
chronograph
continues.
Auto-Lap ON
You cannot manually mark laps if the
Auto-Lap feature is ON. See page 20,
Set the Auto-Lap Feature, to turn
the feature ON / OFF.