National Instruments NI WAP-3711 - Manual (Page 17)

NI WAP-3701/3711 User’s Manual Web Console Configuration
3-3
Save, Save & Restart, and Cancel Buttons
There are three buttons at the bottom of each page for configuring settings—Save, Save &
Restart, and Cancel. Clicking Save stores changes to the NI WAP-3701/3711’s memory and
returns you to the home page. Clicking Save & Restart stores the changes to the NI
WAP-3701/3711’s memory and restarts the NI WAP-3701/3711 to activate the new settings.
Clicking Cancel discards any changes already made and returns you to the home page.
Note that if you click on Save, the home page will reflect the fact that the configuration settings
have been changed by displaying two buttons—Restart and Cancel. In addition, changes are
highlighted in red. Clicking Restart restarts the AP to activate the new settings. Clicking Cancel
discards all of the changes.
Home and Refresh Buttons
At the bottom of each status page that shows read-only information, there are two buttons—Home
and Refresh. Clicking Home brings you back to the home page. Clicking Refresh updates the
status information showing on the page.
Viewing Status
Associated Wireless Clients
On this page, the status information of each associated client, including its MAC address, IP
address, user name (if the client has been IEEE 802.1X authenticated), number of bytes it has sent,
number of bytes it has received, and the time of its last activity, is shown.