National Instruments NI WAP-3711 - Manual (Page 43)

NI WAP-3701/3711 User’s Manual Troubleshooting
B-4
The NI WAP-3701/3711 stops working and does not respond to Web management requests.
y The firmware of the AP may be stuck in an incorrect state.
¾ Unplug the power connector from the power jack, and then re-plug the connector to
restart the AP.
¾ Report this problem to our technical support staff.
y If the AP still does not work after being restarted, some hardware components of the AP may
have failed.
¾ Contact our technical support staff.