National Instruments NI WAP-3711 - Manual (Page 38)

A A
Appendix A
Default Settings
TIP Press the Reset (SF-Reset, or Soft-Reset) switch on the housing of a powered-on AP to reset the
configuration settings to factory-default values.
Setting Name Default Value
Global
User Name admin
Password root
IEEE 802.11g
Regulatory Domain FCC (U.S.) or ETSI (Europe)
Channel Number 11 for FCC or 13 for ETSI
SSID NI
SSID Broadcasts Enabled
Transmission Rate Auto
Transmit Power 100%
MAC Address
See the label on the accompanying PCMCIA card
or the label on the housing of the NI
WAP-3701/3711.
Security Mode Open System
Selected WEP Key Key #1
WEP Key #1 00-00-00-00-00
WEP Key #2 00-00-00-00-00
WEP Key #3 00-00-00-00-00
WEP Key #4 00-00-00-00-00
MAC-Address-Based Access Control
Disabled
Access Control Table Type Inclusive
Wireless Client Isolation
Disabled
AP Load balancing
Disabled
Link Integrity Disabled
Association Control
Max Number of Clients 64
Block Clients if Traffic Load Exceeds Disabled