Nova Kool PRO 600E - Manual (Page 15)

ENGLISH
NovaJet PRO 600e
Quick Start 15
Priming the ink delivery lines
After filling the ink reservoirs, you will need to prime each of the four ink delivery lines to
establish ink flow through the lines and ink cartridges. The NovaPrime is provided for
this purpose. Be sure it has batteries in it before continuing.
This procedure needs to be done the first time you set up the printer and whenever ink
cartridges are replaced. It is not necessary when refilling the reservoirs.
When filling more than one color of ink, be sure to thoroughly wipe any excess ink from
the NovaPrime before working with the next color to avoid the possibility of contamina-
tion.
➪ ➪ ➪ ➪ ➪
To install tube needle assemblies and prime the delivery lines
1 Snap the tube needle assembly connector into the fitting on the carrier.
Insert the needle into the small hole on the NovaPrime. There are two
connectors for each cartridge - one is blue and the other is gray. Be sure
that the tube needle assembly is plugged into the same color connector as
the ink reservoir.
2 Press the button on the NovaPrime to activate the vacuum and draw ink from
the reservoir into the needle.
Sight Tube