Nova Kool PRO 600E User Manual

Page 4

Advertising
background image

NovaJet PRO 600e

4 Quick Start

Assembling the stand and printer

1

Locate the box containing the printer head and turn it upside down. Open the
box and remove the Setup box which contains the screws and screwdriver to
use for the next steps.

2

Open the box containing the stand and remove the stand and feet from the
box.

3

Note that each foot has two casters, only one of which locks. Attach the feet
to the stand legs using the screwdriver and screws provided in the setup
box. Locate the casters so that they are diagonally opposite each other.
Lock the casters to prevent the stand from rolling during subsequent assem-
bly.

4

One of the stand legs has a connector on it. Pull the connector from the
access hole in the leg and remove the tiewrap holding the connector in
place. Attach the connector to the receptacle on the bottom of the print
head. Orient the stand legs so that the roll holder brackets are facing the
center of the printer head and align with the holes in the bottom of the printer
head. Attach both stand legs to the printer head using the screwdriver and
eight screws contained in the Setup box.

CAUTION: Be careful not to pinch the cable when attaching the leg.

5

Two persons are required to lift the printer. Remove the assembled printer
and stand from the box. Save the boxes and packing materials in case you
ever need to ship the printer.

Advertising