Nova Kool PRO 600E User Manual
Page 9
ENGLISH
NovaJet PRO 600e
Quick Start 9
1
Insert the CD-ROM in your disk drive and navigate to
drivers\MAC\(language)\epu and double-click the Install Print Utility icon.
2
Click Continue. Driver installation information displays. You may want to
print it at this time.
3
Click Continue and the program will prompt you with further instructions.
4
Select the port to which your printer is connected. If you are using a print
server, select AppleTalk for the port, then select the print server in the
Chooser using one of the LaserWriter drivers.
If you are not using AppleTalk, you will need a standard ImageWriter II serial
cable attached to either the printer or modem port. Attach the other end of
the cable to the RS-422 port on the printer. Refer to the instructions on the
CD-ROM for further details.
!
Caution: Wider prints (60" vs 42" vs 24") and 600DPI prints require substantial
file sizes. You may experience printer slowing or stalling when using the
Windows driver to print from an application, or when printing a file using the
ENCAD Macintosh EPU. The number of print passes specified will significantly
impact the data transfer requirements. Less passes require more data; conse-
quently, there is a higher probability of stalling when using less passes (faster
printing modes). To do independent RIPing and printing, or faster simultaneous
RIPing and printing, you may want to consider a stand-alone software or hardware
RIP product. A list of RIP products that supports the NovaJet PRO 600e can be
found at www.encad.com.
Installing the ICC Color Profiles
Note: ICC color profiles are installed automatically for the Macintosh EPU.
ENCAD Windows drivers use ICC color management profiles to provide the best
possible color match between your original source file and your final printed output.
These files, while not required, are essential to providing the maximum efficiency and
quality from your ENCAD Windows drivers. These color profiles are located in the Color
folder on the CD-ROM shipped with your printer. It is highly recommended that you
install these files prior to printing with your new printer.
1
Insert the CD-ROM into your disk drive.
2
Open the \Color folder.
3
Double click 600eicc.exe.
4
The color management files are installed in C:\Windows\system\color and
have a file extension of .icm.