English, Suomi, Not in use – Nx Networks NX series User Manual

Page 68: System menu, Language

Advertising
background image

68(86)

Control keypad

7

Figure 7-10. Selection of language

7.3.6.3 System

settings

In the System settings submenu (S6.3) under the System menu it is possible to further customise
the frequency converter operator interface. The functions available in this menu are Password,
Parameter lock, Internal brake resistor connection, Fan control, HMI acknowledge timeout
and HMI retry.

Password (S6.3.1)

The application selection can be protected against unauthorised changes with the Password
function (S6.3.1).
By default, the password function is not in use. To activate the function, enter the edit mode by
pushing the

right arrow menu button

. A blinking zero appears in the display and a password can

be set with the

Browser buttons

. The password can be any number between 1 and 65535.

Note The password can be set by digits. In the edit mode, push the

right arrow menu button

once

again and another zero appears on the display. First set the units. Push the

left arrow menu

button

and set the tens etc. Finally, confirm the password setting with the

Enter button

. After this,

wait until the Timeout time (P6.4.3) (see page 72) has expired before the password function is
activated.
If the applications or the password itself are changed the system will request the current
password. The password will be entered with the

Browser buttons

.

Figure 7-11. Password setting

Note! Store the password in a secure location! No changes can be made unless a valid password
is entered!

READY

I/O term

0

READY

I/Oterm

OR:

enter

00

READY

I/O term

enter

Password

Not in use

Password

Password

System Menu

S1

"

S11

READY

I/O term

Language

English

READY

I/Oterm

Language

English

READY

I/Oterm

enter

Language

Suomi

READY

I/Oterm

Advertising