0 hz – Nx Networks NX series User Manual

Page 75

Advertising
background image

Control keypad

75(86)

7

If the user wants the parameters of the new application to be automatically uploaded to the
keypad this will have to be done for the parameters of the new application once on page 6.5.1 as
instructed. Otherwise the panel will always ask for the permission to upload the parameters.

Note: Parameters saved in the parameter settings on page S6.5.3 will be deleted when
applications are changed If transfer of the parameters from one application to another is required,
they must be uploaded first to the keypad.

7.3.6.6 Parameter

comparison

In the Parameter comparison submenu (S6.6), the actual parameter values to the values of
thecustomised parameter sets and those loaded to the control keypad can be compared.

The comparison is performed by pushing the

right arrow menu button

when in the Parameter

comparison submenu. The actual parameter values are first compared to those of the customised
parameter Set1. If no differences are detected a '0' is displayed on the lowermost line. But if any
of the parameter values differ from those of the Set1 the number of the deviations is displayed
together with symbol P (e.g. P1

#

P5 = five deviating values). By pressing the

right arrow menu

button

once again it is possible to enter the pages where both the actual value and the value it

was compared to can be seen. In this display, the value on the

Description line

(in the middle) is

the default value and the one on the

value line

(lowermost) is the edited value. Furthermore, it is

possible to also edit the actual value with the

Browser buttons

in the edit mode that you can reach

by pushing the

right arrow menu button

once again.

Figure 7-21. Parameter comparison

C1

"

C3

RE ADY

RE ADY

I/Oter m

READY

I/Oterm

0

enter

I/Oterm

P1

"

P6

P2.1.2= 50.0

READY

I/Oterm

20.0 Hz

P2.1.2= 50.0

READY

I/Oterm

20.0 Hz

ParamComparison

Set1

Set1

CONFIRM CHANGE

EDIT VALUE

OR

Advertising