Nortel Networks CTA 500dm - Manual (Page 36)

36 AT commands
CTA 500 dm On Line Guide P0873832 Issue 05
En set echo command 0 turn echo off
1 turn echo on (default)
&Zn= save dial string locations 0-9 (default 0)
&Zn? display saved dial string locations 0-9 (default 0)
Vn verbose control 0 numeric indications
1 full indications (default)
Qn result code control 0 result codes are sent (default)
1 result codes are suppressed
Xn call monitoring
result code selection
0 connect only
1 connect rate only
2 connect rate only
3 connect rate and busy
4 connect rate and busy
(default)
Command Description Value