Nortel Networks CTA 500dm - Manual (Page 53)

AT commands 53
P0873832 Issue 05 CTA 500 dm On Line Guide
MP
The following command is available for CTA 500dm versions that
support MP.
MP command summary
Rate Multiplier
The Rate Multiplier Command
@B0=value
controls the number of links used when the CTA 500dm is operating
in the MP mode.
A value of 1 indicates that a single link may be used. A value of 2
indicates that two links may be used. The default value is 2.
Result Codes
OK Appears when the value is supported.
ERROR Appears when the selected value is not recognized or is not
supported.
CTI MUX Mode
The CTI MUX mode command
ATCTI
activates the ACCESS multiplexer functionality on the CTA 500dm.
Automatically issued when ACCESS/TAPI is being installed on the
PC using the CTA 500dm.
Command Description Value
@B0=n set number of links
in MP bundle
1 single channel used
2 both channels used (default)