Nortel Networks CTA 500dm - Manual (Page 42)

42 AT commands
CTA 500 dm On Line Guide P0873832 Issue 05
Set S-Register
The Set S-Register Command
Sregister number=[value]
instructs the CTA 500dm to set the speciÞed S-register to a value.
The register number must be speciÞed. An unspeciÞed value causes
the register to have a default setting and an initial factory value.
Result Codes
OK Appears when the command is successfully completed.
ERROR Appears when the chosen register or the value for the
register is invalid.
Query S-Register
The Query S-Register Command
Sregister number?
instructs the CTA 500dm to return the value of the selected S-
register.
Result Codes
OK Appears on a new line following display of the S-register value.
ERROR Appears when the chosen register is invalid.