Nortel Networks SRG50 - Manual (Page 31)

Chapter 3 Task summary 31
SRG50 Configuration Guide
Call routing configuration
1 Decide on the fallback scheme.
Internal Reference: Fallback configuration on page 72
2 Configure the outgoing routes (VoIP and PSTN fallback).
Configuration > Telephony > Dialing Plan > Routing
Internal Reference: Outgoing calls configuration on page 74
External Reference: Networking Configuration Guide (NN40020-603)
3 Configure access to the SRG PSTN (for both local and tandem calls).
Configuration > Telephony > Dialing Plan > Routing
Internal Reference: SRG PSTN access on page 76
External Reference: Networking Configuration Guide (NN40020-603)
4 Configure for Network Bandwidth Management and Advanced Network Bandwidth
Management.
Internal Reference: Bandwidth management configuration: NBWM, ADBWM, and ACR on
page 40
External Reference: Branch Office: Installation and Configuration (553-3001-214) and Data
Networking for Voice over IP (553-3001-160)
5 Configure for Alternative Call Routing.
Internal Reference: Bandwidth management configuration: NBWM, ADBWM, and ACR on
page 40
External Reference: What’s New for Communication Server 1000 Release 4.5 (553-3001-015)
Redirection and call forward configuration
1 Configure the main office settings.
Configuration > Resources > Survivable Remote Gateway > S1000 Main Office Settings
tab
Internal Reference: CS 1000 information for the SRG on page 44
2 Configure the IP terminal settings.
Configuration > Resources > Survivable Remote Gateway > S1000 IP Terminal Details
tab
Internal Reference: IP telephones redirection on page 47