Nortel Networks SRG50 - Manual (Page 53)

53
SRG50 Configuration Guide
Chapter 5
IP telephones setup and configuration
IP telephone setup and DN configuration are described in detail in the IP Telephone Installation
and Configuration Guide and the Networking Configuration Guide (NN40020-603), respectively.
SRG-specific procedures and settings include:
• Registration password on page 53
• Local mode indication on page 55
• IP telephone codec and jitter settings on page 55
• Telephone (DN) records configuration on page 56
• Received numbers configuration on page 59
• DHCP settings configuration on page 60
• Call forwarding options on page 60
• Configuration settings for redirected phones on page 61
• Test Local Mode on page 61
• Features in local mode on page 62
• 911 Emergency Services Support on page 63
Registration password
If a registration password is configured on the SRG, the IP telephone installer must enter the
password before the telephone can be configured.
To set the IP telephone registration password
1 In Element Manager, navigate to Configuration > Resources > Telephony Resources.
2 On the Modules panel, locate the Module type column and select the IP & Application Sets
row (see the figure
Telephony Resources panel, IP and App Sets on page 54).
3 On the Details for Module: subpanel, select the IP Terminal Global Settings tab.