Internal reference, Bandwidth, Management configuration: nbwm, adbwm, and acr – Nortel Networks SRG50 User Manual
Page 40: Did trunks (see, Bandwidth management configuration: nbwm, adbwm, And acr

40
Chapter 4 CS 1000 considerations
NN40140-500
NN40140-500
Bandwidth management configuration: NBWM, ADBWM, and
ACR
To configure SRG for NBWM and ADBWM
1
Obtain the Virtual Private Network ID and the Zone ID numbers configured at the main office.
2
Use Element Manager to enter these numbers in the appropriate fields at Configuration >
Telephony > Dialing Plan > Private Network > Dialing Plan - Private Network panel > VoIP
subpanel (see the figure
Dialing Plan - Private Network panel, VoIP subpanel
Figure 4 Dialing Plan - Private Network panel, VoIP subpanel
To configure Alternative Call Routing with attendant service
1
Complete the procedure,
To configure SRG for NBWM and ADBWM
For more information, see
on page 74, and see also the
Networking Configuration Guide (NN40020-603).
2
Obtain the ALTPrefix for the SRG (configured at the main office).