NetComm V90 - Manual (Page 16)

V90 VoIP Phone User Guide YML871Rev1
1 www.netcomm.com.au
reset Configuration Settings
If you would like to reset the V90 VoIP Phone to factory default settings, click on Tools and then Reset Config
button. Press OK in the dialog box to confirm the reset. Please remember to use the default password to
access the phone again.
Note: This will reset the entire phone configuration back to factory settings. Please note that all settings in Phone Book will be erased
as well.
Note: Another way to reset the unit is by pressing *09987 on the phone keypad while the handset is in on-hook state.
System reboot
If you would like to reboot the V90 VoIP phone, click on Tools and then Reboot. Press OK in the dialog box to
confirm the reboot. The phone will then reboot automatically.