NetComm V90 - Manual (Page 21)

YML871 Rev1 V90 VoIP Phone User Guide V90 VoIP Phone User Guide
www.netcomm.com.au 1
Adjusting the LCD Contrast
1. While the phone is idle, press Right or Left button to increase or decrease the LCD Contrast level as
shown on the LCD.
resetting Phone Configuration
To reset the V90 VoIP Phone to factory configuration:
1. Press Menu
2. Select SYSTEM TOOLS
3. Select RESET CONFIG
4. Press Enter
5. Enter the Username (default is admin) and Password (default is admin)
This will reset the entire phone configuration back to factory settings. Please note that all settings in PHONE
BOOK will be erased as well.