Shipping contents – NetComm V90 User Manual

Page 8

Advertising
background image

V90 VoIP Phone User Guide

YML871Rev1

8

www.netcomm.com.au

Standards Supported

SIP V2.0 Standard (RFC 3261)

SDP (RFC 2327)

Digest authentication and MD5 encryption (SIP)

ITU-T G.711 Alaw/Ulaw, G.729A, G.729AB, G.723.1 and GSM Voice Codec

RTP (Real Time Data Transmission) RFC1889

RTCP (Real Time Transport Control Protocol) RFC 3550

Proprietary Firewall/Passthrough Technology

Simple Traversal of UDP over NAT (STUN)

Web-based Management

PPP over Ethernet (PPPoE)

PPP Authentication Protocol (PAP)

Internet Control Message Protocol (ICMP)

TFTP Client

Hyper Text Transfer Protocol (HTTP)

Dynamic Host Configuration Protocol (DHCP)

Domain Name System (DNS)

Out-band DTMF Relay: RFC 2833 and SIP Info

SIP proxy address in DHCP (RFC 3361)

RFC 3265 and RFC 3842 for Message Waiting Indication

Hardware Interface

Ethernet PC & LAN Port (2 x RJ-45, 10/100BaseT)

Headset Jack

DC Jack

Note: If your network is not PoE (Power over Ethernet) enabled then you will require an external power adapter before you can use the
VoIP Phone. Please contact NetComm to purchase the correct power adapter for this product.

Shipping Contents

The NetComm V90 VoIP Phone

Item

Description

Warranty registration

Phone warranty card

Quick Start Guide

Quick Start Guide

Ethernet Cable

Straight-through cable

Advertising