Eizo 531L - Manual (Page 13)

English
3. SETTING UP THE eClient
13
3. SETTING UP THE eClient
This chapter presents how to prepare for a connection with a WTS when the eClient
starts up for the first time.
3-1. WBT Setup Wizard
1.
Turn on the power switch.
The power indicator turns green.
NOTE
• When no picture is displayed, or when the following message is shown on the
screen, please refer to “8. Troubleshooting” on page 92.
- Message -
In use of a stylus or a finger as an input device, “No Mouse Connected!!” caution
does not effect your operation (531LT-GR only).